7
How to install
Also refer to your computer’s user manual and the manuals for any optional devices you are using.
1
Turn on the computer
<98/98 SE
⽧
Install>
Turn on your computer’s power (and connected devices) to start Windows 98/98 SE.
2
Install the device driver/utility software
<98/98 SE
⽧
Install>
When using the MAUSB-100 for the first time, you must first install the device driver and utility software
included on the provided CD-ROM.
Windows 98/98 SE
1.
Turn on the computer, then place the provided
CD-ROM into the computer’s CD-ROM drive.
2.
When the CD-ROM is recognized, the
InstallShield setup window is displayed for a few
seconds. Then, the installation window appears
automatically.
3.
Click the [Next] button.
●
If the window at right does not appear, refer to
“If the installation window does not appear when the
CD-ROM is loaded” (
墌
p. 9).
●
If you want to cancel the installation, click [Cancel].
Note
Do NOT connect the MAUSB-100 to the
computer until installation of the device driver/
utility software is completed.
Before installation, make sure that the computer is turned on, then follow the steps below to install the device
driver and utility software on your computer.
●
Note that the windows shown below may look different on your computer, depending on how your operating
system is configured.
Do not connect to the computer before installation.
Summary of Contents for Camedia MAUSB-100
Page 1: ...USB Reader Writer REFERENCE MANUAL ...
Page 47: ...VT560901 ...
