Olympus CAMEDIA D-560 Zoom, User Manual

Page: 164 / 247

120
8
Troubleshooting
Misc
ella
ne
ous
The monitor is hard to see.
Possible cause Corrective action Ref. Page
The brightness is not
adjusted properly. Select in the mode menu and then adjust
the brightness.
P.102
The monitor is
exposed to direct
sunlight. Block the sunlight with your hand. –
Vertical lines appear
on the monitor screen. Bright light, such as direct sunlight, may cause
vertical lines to appear on the monitor screen.
This is not a malfunction. –
Pictures you have taken do not appear on the monitor.
Possible cause Corrective action Ref. Page
The power is off. Close the lens barrier, and press to turn the
monitor on.
P.23, 78
The camera is in the
shooting mode. Press quickly twice, or close the lens
barrier and then press to switch to the
playback mode.
P.23, 79
There are no pictures
on the card. NO PICTURE appears on the monitor. Record
pictures. –
There is a problem
with the card. Refer to the “Error codes”. P.117
The camera is
connected to a TV. The monitor does not function when the video
cable is connected to the camera. P.84
The date recorded with the image data is wrong.
Possible cause Corrective action Ref. Page
The date/time is not
set. Set the date/time. The clock adjustment is not
factory-preset. P.28
The batteries are
exhausted. When the batteries run out, the date/time setting
is canceled or becomes inaccurate. Replace the
batteries with new ones and set the date/time
again. P.15, 28
The camera has been
left with the batteries
removed. If the camera is left for a while with the batteries
removed, the date/time setting is canceled. Set
the date/time again. P.15, 28