Olympus CAMEDIA D-560 Zoom User Manual Download Page 131

Page: 131 / 247

MOVIE PLAY - Viewing movies

ack

Press

to select PLAYBACK,

and press

• The movie is played back. When playback

ends, the display automatically returns to
the beginning of the movie.

• The MOVIE PLAYBACK menu is

displayed again after playback ends.
PLAYBACK: Plays back the entire

movie again.

FRAME BY FRAME:

Plays back the movie manually one frame at a time.

EXIT:

Leaves the movie playback mode.

Press

to select from PLAYBACK, FRAME BY FRAME or EXIT,

and press

When FRAME BY FRAME is selected

: Displays the first frame of the movie.
: Displays the last frame of the movie.
: Displays the next frame. The movie can be played continuously

by holding the button down.

: Displays the previous frame. The movie can be played

continuously in reverse by holding the button down.

: Displays the MOVIE PLAYBACK menu.

TIPS

• Movies can also be played back in the shooting mode using QUICK

VIEW.

"QUICK VIEW" (P.79)

• The access time to play a movie varies depending on the total recorded

time and the record mode of the movie.

Note

Summary of Contents for CAMEDIA D-560 Zoom
























































































































































































































































Search results

Summary of Contents for CAMEDIA D-560 Zoom

Reviews:

Brands by name

Popular brands

Olympus CAMEDIA D-560 Zoom, User Manual

Search results

Summary of Contents for CAMEDIA D-560 Zoom

Reviews:

Brands by name

Popular brands