![background image](http://html2.mh-extra.com/html/olympus/camedia-c-7070-wide-zoom/camedia-c-7070-wide-zoom_repair-manual_4182634015.webp)
C-2
Ver. 1
C. ADJUSTMENT METHOD
C-7070 Wide Zoom
[1] Table for Servicing Tools
Note
: J-1 color viewer is 100 ± 10 VAC only.
J-7 chart for parallax adjustment
Chart creation: Draw a 6 mm thick black line
through the center of an A3 sized paper.
Use J-10 collimator made by Kyoritsu Electric Co.
Ltd. or equivalent of it.
[2] Equipment
1. Oscilloscope
2. Digital voltmeter
3. AC adaptor
4. PC (IBM
®
-compatible PC, Pentium processor,
Window
s
98
SE
or M
E
or 2000 or XP)
[3] Adjustment Items and Order
1. AF LED Angle Adjustment
2. Lens Adjustment
3. AWB Adjustment
4. CCD White Point Defect Detect Adjustment
5. CCD Black Point And White Point Defect Detect Adjust-
ment in Lighted
6. PAF Adjustment
6-1. Uniform Adjustment
6-2. Parallax Adjustment
6-3. Distance Adjustment
7. LCD Panel Adjustment
7-1. LCD H AFC Adjustment
7-2. LCD RGB Offset Adjustment
7-3. LCD Gain Adjustment
7-4. LCD Red Brightness Adjustment
7-5. LCD Blue Brightness Adjustment
7-6. LCD VcomPP Adjustment
Note:
1. If the lens, CCD, board and changing the part in item 2-
5 replace, it is necessary to adjust again.
[4] Setup
1. System requirements
Windows 98
SE
or M
E
or 2000 or XP
IBM
®
-compatible PC with pentium processor
CD-ROM drive
3.5-inch high-density diskette drive
USB port
40 MB RAM
Hard disk drive with at least 15 MB available
VGA or SVGA monitor with at least 256-color display
2. Installing calibration software
1. Insert the calibration software installation diskette into
your diskette drive.
2. Open Explorer.
3. Copy the DscCalDI_141 folder on the floppy disk in the
FD drive to a folder on the hard disk.
3. Installing USB driver
Install the USB driver with camera or connection kit for PC.
4. Pattern box (color viewer)
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure. It is used after adjusting the
chroma meter (KC0337) adjust color temperature to 3100
± 20 K and luminosity to 900 ± 20 cd/m
2
. Be careful of han-
dling the l
a
mp and its circumference are high temperature
during use and after power off for a while.
Ref. No.
Name
Part code
J-1
J-2
J-3
KC0336
Pattern box (color viewer)
Calibration software
J-4
Number
1
1
J-6
Chroma meter
1
Spare l
a
mp
1
J-7
1
J-8
T
a
rget board
1
J-9
Chart for parallax adjustment
1
Chart for 0.5 m distance adjustment
1
1
Chart for 2.4 m distance adjustment
J-1
J-2
J-3
J-4
J-5
J-6
J-10
J-5
Siemens star chart
KC0337
KC0339
Collimator
1