![background image](http://html2.mh-extra.com/html/olympus/camedia-c-7070-wide-zoom/camedia-c-7070-wide-zoom_repair-manual_4182634029.webp)
D-3
Ver. 1
D. REPAIR PROCEDURE
C-7070 Wide Zoom
How To Confirm firmware
1. Rename the binary data of the latest firmware with
"
firmware.bin
"
.
Create a folder
"
Firmware
"
in the xD-Picture Card which was formated
i
n C-7070 Wide Zoom
,
and save the binary data
"
firmware.bin
"
into the folder
"
Firmware
"
.
2. Camera is operated by AC adapter.(Do not operate by the battery.)
Insert the F/W card for C-7070 Wide Zoom and turn the camera on at play mode.
3. Monitor shows F/W version and inquiry of F/W rewriting.
Please confirm at this time.
How To Update Firmware
1. Rename the binary data of the latest firmware with
"
firmware.bin
"
.
Create a folder
"
Firmware
"
in the xD-Picture Card which was formated
i
n C-7070 Wide Zoom
,
and save the binary data
"
firmware.bin
"
into the folder
"
Firmware
"
.
2. Camera is operated by AC adapter. (Do not operate
with
battery.)
Insert the F/W card for C-7070 Wide Zoom and turn the camera on at play mode.
3. Monitor shows F/W version and inquiry of F/W rewriting.
Then select
"
YES
"
(Character is changed green) and press
"
OK
",
rewriting of F/W start
s
automatically.
4. During the rewriting it is showed
"
EXCHANING
"
on monitor.
It will take about 2 minutes but please do not operate any key and turn off power.
It might have damaged camera body and F/W.
5. When the rewriting is done, monitor is showed as same as procedure 3.
Then confirm new version of F/W (example: V851-XX) and turn off power after selecting
"
NO
"
.
(The discrimination of countermeasure is not showed due to confirm easily.)
[2] CONFIRMATION AND UPDATE OF THE FIRMWARE