3
•
Do not use the AC adapter outdoors.
Doing so may result in fuming, fire, or electric shock.
The AC adapter is designed for indoor use.
•
Do not subject the AC adapter to strong impact cause by striking it against a wall, dropping it, etc.
Otherwise, malfunction, damage, or electric shock might occur.
•
Do not use commercially-sold electronic transformers for overseas travel use (travel converters).
•
If abnormality is found during insertion of the insertion tube, do not push it in forcibly. Pull out the
insertion tube carefully.
Pay attention to the following when pulling out the insertion tube.
-
Do not bend it forcibly.
-
Do not pull out the inspected object when the angulation section is bent.
-
If the insertion tube gets caught inside while withdrawing, pull while turning it carefully.
•
Pay attention to the following when pulling out the insertion tube.
-
Do not hit or pull the distal end.
-
Do not squeeze or bend the angulation section with force.
-
Do not use the insertion tube if any of the parts are loose.
-
Attach the tip protection hood correctly for use.
If the protection hood is not firmly attached to the distal end of the insertion tube, the entire
observation image or a part of it may appear whitish due to the illumination, or a part of the
angle of view may not be visible. Also, the protection hood may fall off into the inspected
object.
•
Do not look directly into the light emitted from the distal end.
Doing so may hurt your eyes.
•
Do not use components other than the insertion tube in the rain or in water, and do not wash
them with running water or a wet object.
This instrument is not waterproof. Exposure to water may result in electric shock. It must not be
used or stored in water.
•
Do not hit the LCD monitor with an object, press it with force, or rub it with hard or sharp objects.
Doing so may break or scratch the LCD monitor, or cause injuries as a result of the damaged
monitor.
•
Do not insert metallic and other foreign objects into the main unit from the connectors or other
openings.
Otherwise, a malfunction or electric shock may result.
•
Check to make sure that the SD card is correctly loaded before using it.
The SD card might come out if it is not inserted into the slot as far as it will go, if the instrument is
subjected to impact during transport, etc.
•
Do not remove the battery or AC adapter while the system is running.
Otherwise, recorded data may be damaged.
•
Connect the AC adapter, do not insert or remove an SD card, and do not connect or disconnect
the USB cable while image data is being exchanged with a PC.
Otherwise, the data recorded in the SD card may be destroyed.
Abnormal
The image appears white
(due to strong light on some
parts of the image).
Normal
The entire image
appears clear.
F-model.book 3
Summary of Contents for C Series
Page 1: ......
Page 3: ...F model book 2...
