15
3 Pre-observation/pre-operation preparation and inspection
Checking the remaining battery level
When operating the instrument under battery power, an indicator in the upper right corner of the
screen shows remaining battery power. The table below shows general guidelines for remaining
battery power.
CAUTION
*1 Do not record or delete images, or format the SD card. If power runs out during these operations data
could be corrupted.
*2 If the battery indicator starts to blink, quickly turn off the power or connect the AC adapter.
If you continue to use the instrument without connecting the AC adapter, the power will shut down and
may cause damage to the recorded data.
Checking the illumination of the distal end
Touch the [LIGHT] button on the live screen to turn on or turn off the light.
CAUTION
•
When you need to stop using the instrument temporarily, such as to replace the tip protection hood, touch
the [LIGHT] button to turn off the light.
Checking the angulation operation of the insertion tube
Extend the insertion tube straight out and operate the joystick
to check for smooth angulation section operation.
Angulation movement matches the angle and direction of
joystick movement.
NOTE
•
There will be some sound when operating the joystick; this is not a
malfunction.
Indicator
Battery condition
Battery power is sufficient (100% to 50%).
Battery power is low (50% to 25%).
*1
Battery power is almost depleted (25% to 5%).
*2
Battery power is depleted. Charge the battery or replace it with a
charged battery (5% to 1%).
F-model.book 15
Summary of Contents for C Series
Page 1: ......
Page 3: ...F model book 2...
