Olympus C-50 - Camedia 5MP Digital Camera Reference Manual Download Page 16

Page: 16 / 165

Thread the end (small loop) of the
strap through the strap eyelet.

Thread the rest of the strap
through the small loop that you
threaded through the eyelet.

Pull on the strap to make sure it
is securely fastened.

Attaching the strap

●

Be careful with the strap when you carry the camera, as the strap can easily
catch on stray objects, causing serious damage.

●

Attach the strap correctly as shown so that the camera does not fall off. If
the strap is attached incorrectly and the camera falls off the strap, Olympus
is not responsible for any damages.

Note

Chapter 1

Getting star

ted

Strap eyelet

Summary of Contents for C-50 - Camedia 5MP Digital Camera






































































































































































Search results

Summary of Contents for C-50 - Camedia 5MP Digital Camera

Reviews:

Related manuals for C-50 - Camedia 5MP Digital Camera

Brands by name

Popular brands

Olympus C-50 - Camedia 5MP Digital Camera, Reference Manual

Search results

Summary of Contents for C-50 - Camedia 5MP Digital Camera

Reviews:

Related manuals for C-50 - Camedia 5MP Digital Camera

Brands by name

Popular brands