Olympus C 4000 - CAMEDIA Zoom Digital Camera Reference Manual Download Page 25

Page: 25 / 245

Chapter 1

Card basics (Cont.)

Make sure the camera is turned off (i.e. the
mode dial is set to OFF).

Open the card cover.

Inserting the card

Insert the card fully with the contact area
facing towards the monitor side. Insert
until you feel it locked into place.

●

Hold the card in a straight orientation to the
card slot. Do not attempt to insert the card at
an angle.

●

Note the orientation of the card. If it is
inserted incorrectly, it may become jammed.

Removing the card

Push in the card lightly to unlock it, then
pull it out.

Close the card cover securely until it
clicks.

Inserting/removing the card

●

Never open the card cover, eject the card, remove the batteries, or
disconnect the optional AC adapter while the camera is in use or the
camera is communicating with a computer.

Doing so could destroy all

data on the card.

●

Destroyed data cannot be restored.

Note

Mode dial

Summary of Contents for C 4000 - CAMEDIA Zoom Digital Camera






















































































































































































































































Search results

Summary of Contents for C 4000 - CAMEDIA Zoom Digital Camera

Reviews:

Related manuals for C 4000 - CAMEDIA Zoom Digital Camera

Brands by name

Popular brands

Olympus C 4000 - CAMEDIA Zoom Digital Camera, Reference Manual

Search results

Summary of Contents for C 4000 - CAMEDIA Zoom Digital Camera

Reviews:

Related manuals for C 4000 - CAMEDIA Zoom Digital Camera

Brands by name

Popular brands