Olympus AZ-1 ZOOM Reference Manual Download Page 32

Page: 32 / 212

Taking still pictures

Shooting

Adjust the focus.

Press the shutter button gently (halfway).

Release the shutter.

Press the shutter button all the way (fully).

•

When the focus and exposure are
locked, the green lamp lights
steadily.

•

The

(flash stand-by) mark

lights when the flash fires.

•

When a picture is taken, a shutter
sound is output.

•

The

(card access) mark blinks

and the camera starts recording
the picture.

•

Press the shutter button gently. If it
is pressed hard, the camera may
move and pictures may come out
blurred.

To check the picture immediately
after shooting:

“REC VIEW — Checking the

picture immediately after shooting”
(P. 117)

Green lamp

P. 38

Flash stand-by/Flash
charging mark

P. 59

Card access mark

P. 33

02AZ-1ENP31 04.3.25 2:25 PM Page 32

Summary of Contents for AZ-1 ZOOM





















































































































































































































Search results

Summary of Contents for AZ-1 ZOOM

Reviews:

Related manuals for AZ-1 ZOOM

Brands by name

Popular brands

Olympus AZ-1 ZOOM, Reference Manual

Search results

Summary of Contents for AZ-1 ZOOM

Reviews:

Related manuals for AZ-1 ZOOM

Brands by name

Popular brands