12
Miscellaneous
199
Troubleshooting
The camera is not recognized by the printer.
Possible cause
PC was selected on the
monitor after connecting to
the printer with a USB cable.
The printer is not compatible
with the PictBridge system.
Corrective action
Disconnect the USB cable from the camera and
start again from the beginning.
Refer to the printer’s instruction manual, or
consult the printer’s manufacturer.
Ref. Page
P. 147
P. 146
When the camera is connected to a PC or Printer
The camera is not recognized by the PC.
Possible cause
The USB driver has not
been installed.
The power is off.
Corrective action
It is necessary to install the USB driver for
Windows 98/98 SE.
Press the
POWER
switch to turn the camera
on.
Ref. Page
P. 176
P. 30
12AZ-1ENP192 04.3.25 3:15 PM Page 199