Olympus AZ-1 ZOOM Reference Manual Download Page 36

Page: 36 / 212

Movie recording

Shooting

Turn on the camera in the

mode.

P. 30

Compose your shot while viewing the
monitor.

Start recording.

Press the shutter button fully.

You can record movies and sound simultaneously.

Press

Mode switch

Shutter button

POWER

switch

Monitor

AF target mark

P. 39

Remaining movie
recording time
(hour: min. : sec.)

Flash cannot be used.

Microphone

•

The subject can be magnified
using the zoom button.

“Zoom” (P. 41)

•

The remaining recording time
depends on the selected record
mode, free space available on the
card, etc.

“Selecting the

record mode” (P. 66)

Displayed in red during recording

Focus and optical zoom are
locked during movie recording, but
digital zoom can be used.

“DIGITAL ZOOM — Using the

digital zoom” (P. 60)

02AZ-1ENP31 04.3.25 2:25 PM Page 36

Summary of Contents for AZ-1 ZOOM





















































































































































































































Search results

Summary of Contents for AZ-1 ZOOM

Reviews:

Related manuals for AZ-1 ZOOM

Brands by name

Popular brands

Olympus AZ-1 ZOOM, Reference Manual

Search results

Summary of Contents for AZ-1 ZOOM

Reviews:

Related manuals for AZ-1 ZOOM

Brands by name

Popular brands