Olympus 262829 Instruction Manual Download

Page: 76 / 164

co
rd

ies

Selecting the record mode

Movie Record Mode

Recording Audio when Recording Movie

Set to

[ON]

to record sound simultaneously when movie recording begins.

• Select using

, then press the

button.

Notes

• When recording sound in a movie, the sound of the lens triggering and camera operating may

be recorded. If desired, you can reduce these sounds by shooting with

[AF MODE]

set to

[S-AF]

, or by limiting the amount of times you press the buttons.

• With

[ART7]

(DIORAMA), sound cannot be recorded.

Set to

[ON]

to take a still picture when you perform the operation to end recording of a movie.

This feature is useful when you want to record a still picture as well as the movie.

• Select using

, then press the

button.

Live control

[

]

Menu

[

]

[

]

[MOVIE]

Record mode

Application

The number of pixels is 1280 × 720. You can record high-definition movies.

The number of pixels is 640 × 480.

Live control

[MOVIE

]

Menu

[

]

[MOVIE

]

Taking still picture automatically when movie recording ends

Menu

[

]

[MOVIE+STILL]

s0026_e_00_0_unified.book Page 76 Tuesday, September 29, 2009 10:30 AM

Summary of Contents for 262829





































































































































































Search results

Summary of Contents for 262829

Reviews:

Related manuals for 262829

Brands by name

Popular brands

Olympus 262829, Instruction Manual

Search results

Summary of Contents for 262829

Reviews:

Related manuals for 262829

Brands by name

Popular brands