Olympus 262829 Instruction Manual Download

Page: 110 / 164

110

int
in

Single-frame reservation

Follow the operation guide to set print reservation for a picture.

[

]

[

]

• Selection is also possible during playback by pressing

the

button

Select [

] and press the

button.

Press

to select the frame that you want to set

as print reservation, then press

to set the

number of prints.

• To set print reservation for several pictures, repeat this

step.

Press the

button when you have finished.

• The menu screen for single-frame reservation appears.

Select the date and time format and press the

button.

[NO]

The pictures are printed without the date and

time.

[DATE]

The pictures are printed with the shooting date.

[TIME]

The pictures are printed with the shooting time.

Select [SET] and press the

button.

EDIT

RESET PROTECT

SET

BACK

Operation guide

BACK

SET

PRINT ORDER SETTING

BACK

SET

x 2

100-0009

DATE

TIME

BACK

SET

CANCEL

BACK

SET

PRINT ORDER SETTING

s0026_e_00_0_unified.book Page 110 Tuesday, September 29, 2009 10:30 AM

Summary of Contents for 262829





































































































































































Search results

Summary of Contents for 262829

Reviews:

Related manuals for 262829

Brands by name

Popular brands

Olympus 262829, Instruction Manual

Search results

Summary of Contents for 262829

Reviews:

Related manuals for 262829

Brands by name

Popular brands