Olympus 262829, Instruction Manual

Page: 45 / 164

45
EN
1
Exposure
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit
subject or a scene at dusk), you can pick the picture you prefer from a selected number of
frames with a variety of different exposure settings (exposure and compensation values). The
pictures are taken in the following order: Picture with optimum exposure, picture adjusted in –
direction, and picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed. g “EV STEP” (P. 102)
Number of frames: 3
Start shooting.
• In single-frame shooting, the exposure changes every
time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
• Releasing the shutter button stops bracketing shooting.
When it stops,
0
is displayed in green.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
AE bracketing
Menu
MENU
[ c ] [ V ] [BRACKETING] [AE BKT]
TIPS
e.g.) When BKT is set to [3F 1.0EV]
-1.0 EV +1.0 EV ±0
AE BKT
WB BKT
ISO BKT
FL BKT
BRACKETING
SET BACK
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
s0026_e_01_exposure_7.fm Page 45 Tuesday, September 29, 2009 11:19 AM