Olympus 262010 - E-3 Digital Camera SLR Instruction Manual Download Page 32

Page: 32 / 156

Basic camera operations

Switching the information display

You can switch the information displayed on the monitor by pressing

INFO

button repeatedly.

*1 Displayed when

[FRAME ASSIST]

is set.

“FRAME ASSIST (Ruled lines

display)” (P. 95)

*2 For operation in the enlarged display, refer to “Enlarged display operation”.

Enlarged display operation

It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.

Use

to move the frame and press the

button.

• Area inside the frame is enlarged and displayed.
• Press and hold the

button to return the shifted enlargement frame to the center.

Turn the main dial (or sub dial) to change the magnification (5×/7×/10×).

• Pressing the

button cancels enlarged display operation.

Checking the image stabilizer effect:

Press and hold the

button.

“Checking the image stabilizer effect with live view” (P. 60)

Checking the subject on the monitor even in low light situations:

See “LIVE VIEW BOOST” (

P. 95).

Notes

• If there is a high-intensity light source within the screen, the image may be displayed darker

but will be recorded normally.

• If the live view function is used over a long period, the temperature of the image pickup device

rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either
lower the ISO sensitivity or turn off the camera for some time.

• Exchanging the lens will cause live view to stop.
• The following functions are not available during live view.

C-AF/AE lock/

[AEL/AFL]

TIPS

250

250 F5.6

F5.6

L N

250

250 F5.6

F5.6

250

250 F5.6

F5.6

250

250 F5.6

F5.6

Information display on

Information display on
+ Ruled lines display

Information display on

+ Histogram

Enlarged display

Information display off

250

250 F5.6

F5.6

s0011_e_00_0_unified.book Page 32 Wednesday, September 12, 2007 5:34 PM

Summary of Contents for 262010 - E-3 Digital Camera SLR





























































































































































Search results

Summary of Contents for 262010 - E-3 Digital Camera SLR

Reviews:

Related manuals for 262010 - E-3 Digital Camera SLR

Brands by name

Popular brands

Olympus 262010 - E-3 Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 262010 - E-3 Digital Camera SLR

Reviews:

Related manuals for 262010 - E-3 Digital Camera SLR

Brands by name

Popular brands