Olympus 262010 - E-3 Digital Camera SLR Instruction Manual Download Page 120

Page: 120 / 156

120

Shooting tips and maintenance

No indication

BATTERY

EMPTY

The battery is
drained.

Charge the battery.

No indication

CONNECTION

The camera is not
connected to the
computer or
printer correctly.

Disconnect the camera
and connect it again
correctly.

No indication

NO PAPER

There is no paper
in the printer.

Load some paper in the
printer.

No indication

NO INK

The printer has
run out of ink.

Replace the ink cartridge
in the printer.

No indication

JAMMED

The paper is
jammed.

Remove the jammed
paper.

No indication

SETTINGS
CHANGED

The printer’s
paper cassette
has been
removed or the
printer has been
manipulated
while making
settings on the
camera.

Do not manipulate the
printer while making
settings on the camera.

No indication

PRINT ERROR

There is a
problem with the
printer and/or
camera.

Turn off camera and
printer. Check the printer
and remedy any
problems before turning
the power on again.

No indication

CANNOT PRINT

Pictures recorded
on other cameras
may not be
printed on this
camera.

Use a personal computer
to print.

Viewfinder

indications

Control

panel

indications

Monitor

indications

Possible cause

Corrective action

s0011_e_00_0_unified.book Page 120 Wednesday, September 12, 2007 4:46 PM

Summary of Contents for 262010 - E-3 Digital Camera SLR





























































































































































Search results

Summary of Contents for 262010 - E-3 Digital Camera SLR

Reviews:

Related manuals for 262010 - E-3 Digital Camera SLR

Brands by name

Popular brands

Olympus 262010 - E-3 Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 262010 - E-3 Digital Camera SLR

Reviews:

Related manuals for 262010 - E-3 Digital Camera SLR

Brands by name

Popular brands