39
Tool Bar
[New]
Creates a new DSS file in the Message Tray.
[Save]
Saves the
file that is
currently
being edited in the Message Folder
. If you open and edit a DSS
file from a folder other than the Message Tray folder in the Dictation Window, the edited data is
saved to the Message Tray with the same file name. If a file with the same name already exists, a
character is added to the end of the file name (xxxxxxxx_1.dss format) and saved.
[New Index Mark]
Index marks can be assigned to any position in the selected DSS file. By clicking
(Index
Mark Skip Button), you can move to the index mark position of the file at any time. According to the
DSS Specification, a total of 16 index marks can be stored in each file. All index marks remain
attached to the file until they are deleted.
To insert an index mark during playback, start playback, move to the desired position (play the file
or drag the Position Control to the appropriate position), and select "New Index Mark" on the Tool
bar.
To insert an index mark while playback is stopped, press "New Index Mark" at the desired position
in the DSS file.
[Delete Index Mark]
To remove an index mark, first use the [Index Mark Skip Button] or the [View All Index Marks]
command to move to the desired index mark. While playback is stopped, press Delete Index Mark
at the desired position.
[View All Index Marks]
A dialog box opens. Double-click the time at the index mark or select the time and click the [Skip]
button to move to the selected index marks. In addition, you can delete the selected index marks
by selecting the mark while playback is stopped and clicking [Delete].
[Start Partial Erase / Undo]
Begin choosing a section of the DSS file that is currently being edited from the current playback
position. When this operation starts, the command is replaced with an undo erase command
(toggle command).
[Execute partial erase]
Deletes the section between where the Start Partial Erase command was executed and the
position where the Execute Partial Erase was chosen.
