Page 3-6
OLYMPIC SMART SCALE
®
Model 20/25
Service
3. For Model 25 scales, open door on base and remove the four screws
securing the scale to the base (
Fig. 3G
). Lift back of scale and slide
scale backwards until the Volume Control Knob clears the front of the
skirt. Lift scale up and out of base.
NOTE:
If Model 25 scale needs to be returned to Olympic
Medical for servicing, only the scale portion needs to be removed
and returned.
4. Carefully slide the front edge of scale over edge of a bench. Remove
the front screw and then loosen the two screws on the front bottom
hatch (
Fig. 3H
).
5. Slide hatch back and lift out its front edge. Slip the flat ribbon cable out
of retaining clip and remove hatch.
Fig. 3G
Base
Scale
Skirt
Volume
Control Knob
Fig. 3H
Loosen Two
Screws
Front Bottom
Hatch
Remove Front
Screw
Summary of Contents for SMART SCALE 20
