OLYMPIC BILI-METER
Instruction Manual
7
Cleaning
Required items:
Soft cloth
Mild cleaning detergent (e.g., Virex
™
Tb, Virustat
®
, Coverage
®
) or
mild soap-and-water solution
To clean the Bili-Meter:
1
Confirm that the Bili-Meter is off. If it is on, press
POWER
to turn it off.
2
Dampen the cloth with either the mild soap-and-water solution or detergent,
then wipe down all exterior surfaces of the Bili-Meter.
Maintenance and Service
Replacing the Battery
Required items:
5/64-in. FLS Allen wrench
9-volt alkaline, non-rechargeable battery
To replace the battery:
1
Remove the back cover: Loosen and remove the four screws that secure the
back cover of the readout (see
Figure 9).
Figure 9
Replacing the battery
2
Insert the new 9-volt battery into the battery holder (see Figure 9).
CAUTION
Only qualified technicians should maintain or service this device.
Read and be familiar with this instruction manual before maintaining or servicing
this device.
The printed circuit boards (PCBs) contain static sensitive parts. Always use appropriate
electrostatic discharge protection, such as an electrical-grounding wrist strap, when
working with internal components.
To assure accuracy, factory-calibrate the Bili-Meter to a radiometric standard annually
(see page 8).
NOTE
#
An instruction label on the inside of the back cover illustrates how to remove and insert
the battery.
Screws (x4)
Back cover
Battery
Battery holder
Polarity icons
