4
OLYMPIC BILI-METER
Instruction Manual
Operation
Connecting the Sensor
The sensor connects to the socket on the readout. To connect, turn the connector
until the keyed slots are aligned, then carefully insert the connector into the socket.
Figure 5
Connecting the sensor to the readout
Figure 6
Disconnecting the sensor
WARNING
Explosion hazard. Do not use this device in the presence of flammables (e.g., oxygen,
nitrous oxide, anesthetics).
CAUTION
Read and be familiar with this instruction manual before using this device.
Only use this device under the direct supervision of a licensed medical practitioner.
Inspect this device before each use to ensure proper functioning.
NOTE
#
The hospital/facility is responsible for ensuring that all personnel who operate or maintain
this device are trained in its operation and safe use, and for maintaining training records of
attendance and evidence of understanding.
Readout
Socket
Connector
CAUTION
Never pull on the cable to remove the connector.
Readout
Pull
Connector sleeve
