Olympia PS 407.2 CCD, Operating Instructions Manual

Page: 21 / 102

21
4 Starting Up
1. Remove the device carefully from the packaging.
Attention:
The underside of the cutting mechanism attachment has sharp edges. Risk
of injury!
2. Place the device on a level surface.
3. Position the device near a power socket. However, do not position it near a source of
heat or water.
4. Insert the waste bin.
Note:
The shredder only operates when the original waste bin is inserted cor-
rectly.
5. Set the On/Off switch to its
OFF
position.
6. Connect the power plug to a power socket.
Note:
Pay attention that the power cable is laid so that people or pets do not walk
over it or that other objects can be set down on it. Pay attention to the in-
formation regarding power supply on the rear side of the device for the
necessary precautions.
Safety information:
For reasons of safety, the power socket to which the shredder
power plug is connected must be near to the device and freely
accessible so that the power supply can be disconnected
quickly in an emergency!