Olympia PS 407.2 CCD, Operating Instructions Manual

Page: 22 / 102

22
5 Operation
Note:
The recommended capacities stipulated in Chapter "Technical Data" must
not be exceeded, otherwise material will jam! Do not forget that the thick-
ness of the paper increases when folded, as a result of which the recom-
mended sheet capacity can be exceeded. Also reduce the quantity of pa-
per when shredding coarse paper.
5.1 Switching the device on
1. Set the On/Off switch to its
ON
position.
The POWER lamp lights up green.
2. Set the function switch to its middle position to the
AUTO
function. The device is
ready to operate.
5.2 AUTO function
When the
AUTO
function is activated, the shredding operation of the cutting mechanism
starts up automatically as soon as material is inserted in the infeed slot:
●
The device switches to forward drive and draws the material in.
●
When shredding is finished, the device switches off automatically.
The
AUTO
function is activated by setting the function switch to its middle position to
AUTO
.
Note:
When the
AUTO
function is activated, paper can be shredded via the pa-
per infeed and CDs and credit cards shredded via the CD/credit card in-
feed. Only one infeed may be used at a time. If you use more than one in-
feed, the device stops. Pay attention to the permissible quantity of material
which can be shredded.
5.3 Inserting paper in the paper infeed
Note:
A maximum of 8 sheets of A4 paper with a weight of maximally 75 g/m
2
may be inserted in the paper infeed at a time.
1. The device is switched on and the
AUTO
function is activated .
2. Insert paper in the paper infeed.