background image

Safety Information

G

7

Safety Information

Significance of the Symbols

WARNING: Indicates potentially dangerous situations which could

lead to fatal or severe personal injury if the information is
ignored.

CAUTION: Indicates potentially dangerous situations which could

lead to minor personal injury if the information is ig­
nored.

NOTE: Indicates potentially dangerous situations which could

lead to property or environmental damage if the informa­
tion is ignored.

Important Safety Information

Please observe the following safety information to ensure the wireless alarm system can be
used safely and reliably:

·

If you are uncertain or have any doubts about the functioning method of the equip­
ment during assembly and installation, contact a specialist. In case of doubt, do
not complete assembly and installation work yourself.

·

Never open the equipment! Never use the device when it is wet or in the vicinity of
a bathtub, shower or such!

·

Repairs to defective equipment must always be completed by authorised service
technicians.

·

Never touch the power adapter plug on the base unit with wet or damp hands.

·

If the power adapter plug shows signs of damage, disconnect the fuse in the fuse
box prior disconnecting the relevant plug from the power socket.

·

The wireless alarm system and packaging materials must not be used as toys by
children.

·

Due to legal requirements, the alarm signal continues for maximally 120 seconds.
The alarm signal switches off automatically after approx. 120 seconds if the user
does not interrupt it.

NOTE: This operating instruction manual contains important

information on setting up and handling the equipment.
The manual must be enclosed with the equipment if
handed over to others.

Summary of Contents for Protect 6 Series































Reviews: