Olympia People, User Manual

Page: 118 / 137

Character Test
Screen Test
According to the Menu, the
function 0 for the character test
can be selected from Program 2.
Following the command “ TYPE
IN FUNCTION#(S) the 0 with
[RETURN] must be input.
ABBREVIATED: A>TEST2 0 [RETURN]
According to the Menu, function
1 for the screen test can be
selected from Program 2.
Following the command “TYPE
IN FUNCTION#(S) the 1 with
[RETURN] must be input.
ABBREVIATED: A > TEST2 1 [RETURN]
As the above pattern shows, all
representable characters are pre­
sented on the screen. The
display allows 20 seconds for a
visual check. Then the test is
ended and the message
“CHARACTER TEST—END”
occurs.
NOTE:
If the display is to last longer
than 20 seconds on the screen,
then REPEAT is to be used.
(See page 7/10).
For a visual test, an upper case
H is output over the entire
screen. The output lasts approxi­
mately 20 seconds. The test is
then terminated and the message
“SCREEN TEST-END.” appears
NOTE:
If the display is to last longer
than 20 seconds on the screen,
then REPEAT should be used
(See page 7/10).
7/17