![background image](http://html1.mh-extra.com/html/olympia/people/people_user-manual_732505131.webp)
Installation and Environmental Conditions
Numerous measures ensure the
reliability of the devices in the
PEOPLE
system. In particular,
protection against environmental
influences of all types were taken
into account, such as line disturb
ances and static electricity dis
charges. The installation and
environmental conditions
described here should ensure
that once a device is started up,
external disturbances are ex
cluded as much as possible,
degree of certainty.
Power Supply
The power of the devices is sup
plied via a commercial plug with
earthing contact to the public
electric power system.
The structure of the devices
meets the international safety and
radio protection law conditions.
Unfortunately, not all electrical
devices on the market fulfill these
conditions. In order to avoid line
disturbances that occur at the
installation site, only those
devices may be connected to the
circuit with
PEOPLE
that corre
spond to the stipulation of the law
regulating the operation of radio
systems.
Line Voltage Relationships
To maintain the reliability of the
device, the supply network may
not exceed the permissible toler
ances in relation to the voltage
fluctuations and frequency drifts:
Nominal voltage: 110V-220/240V
switch selectable
Tolerance:
+
100
/
0
/ -
1 5
%
Rated frequency: 50-60 Hz
Tolerance:
±1% .
The devices are not sensitive to
fast voltage interferences up to
Peak voltage - 2000 V max.
Peak width - 300 ns pulse width
min.
Rise time - 5 ns rise time min.
If disturbances occur with energy
bearing voltage interference,
such as those which are caused
when other power consumers are
connected parallel, a voltage
regulator or a power line filter
must be provided by the user.
Location
The device must be installed so
as to be protected against vibra
tions, moisture, and dust as well
as direct heat exposure from the
sun and/or heaters.
The following conditions must be
met:
Tilt permissible to 2°
Vibration during operation:
permissible under 0.2 G
10 to 100 Hz
Vibration during transport:
permissible under 2 G
10 to 100 Hz
Environmental temperature
During operation between + 5°C
and + 40°C/ + 40°F and +100°F
For storage between - 22° C and
+ 4 7 °C /-4 °F and +113°F
Humidity between 20% and 80%
non-condensing
The air vents of the device must
be kept clear and must not be
blocked by working materials or
pieces of furniture, etc.
A
/6
Power and data cables that are
laid outside of the unit must -be
safeguarded against damage and
personal injury (tripping). The .
location must be free of vibration,
i.e., it may not be in the near
vicinity of the operation of heavy
machinery.
Electrostatic Charges
Separation of charge causes
electrostatic charges.
The principal factors that deter
mine the height of electrostatic
charges are the relative humidity,
the floor covering material, the
type of fiber used in the carpet,
and the floor material. If sitting,
the material of the cushion and
the clothing of the operators influ
ence the charge.
The devices are protected within
the normal framework against
disturbances caused by the dis
charging of electrostatic charges.
Summary of Contents for People
