Olympia A 4610, Operating Manual

Page: 18 / 72

18
If Problems Occur
5. The laminating pouch is drawn in
automatically and ejected at the
output
2
via the
pouch guide
1
.
CAUTION!
Risk of burns
through hot laminating pouch.
When the laminating pouch is
ejected after lamination, it is
extremely hot. Only remove the ejected
lamination pouch holding it at the
cooled end.
6. When all the lamination processes have been completed, press the
POWER 4
button to switch the laminator off.
If Problems Occur
Clearing Pouch Jams
If you inadvertently feed the laminating pouch into the
infeed
10
at an
angle, or if the rollers are soiled with too much residual adhesive, or if
you try to laminate unsuitable materials, laminating pouches can jam
inside the laminator.
1. Press and hold the
REVERSE
6
button. The laminator runs in reverse
direction.
CAUTION!
Risk of burns through hot laminating pouch. When
the laminating pouch is ejected after lamination, it is extremely
hot. Only remove the ejected lamination pouch holding it at the
cooled end.
2. Carefully pull the laminating pouch out of the
infeed
10
of the lamina -
tor.
3. Only release the
REVERSE
6
button when the laminating pouch has
been fully ejected at the infeed
10
.
After a pouch jam, always clean the laminator. Clean the laminator as
described in Section
Regular Maintenance and Service
.
G