Olympia A 4610, Operating Manual

Page: 16 / 72

16
Checking the Package Contents
G
Checking the Package Contents
Check the package contents of the laminator before putting the laminator
into operation. If anything is missing or damaged, do not put the lamina -
tor into operation. Please contact our
Service
Department.
•
A 4610 laminator
• Power cable
•
Operating manual
Before You Start
Please observe the following information to ensure continued reliable
operation of the laminator.
•
Pay attention to the symbols on the front of the machine (6-roller
technology, maximum lamination size, Reverse button, cold lamination,
heat-up time, laminating speed and foil thickness) - further information
is provided in the various chapters in this operating manual.
• Do not laminate metal, wet or uneven materials.
•
Always feed the laminating pouches into the laminator infeed
10
with
the closed side first and aligned straight.
•
If laminating pouches need to be cut, only cut the laminating pouches
after laminating.
•
Please remember that hot laminated materials are permanently bond -
ed to the laminating pouch and cannot be separated from the foil
again without possible damage.
• Do not pull the laminating pouch out of the
output
2
during laminat -
ing.
• If you need to transport the laminator, carry it using the recessed
grip
7
.