olympia electronics BS-429/W, Quick Installation Manual

Page: 17 / 28

Page 17 921468007_90_005
system can also be done by simply pressing the ABC key, if during the installation,
the option "ARM WITHOUT CODE" has been selected.
The disarming of the system can be done by using the master code or one of the
user codes that have been programmed for general disarming.
The individual arming of the subsystems Α , Β , C can be done by pressing one of the
user codes that have been programmed to arm each subsystem. The arming can also
be achieved by pressing one of the
Α , Β or C keys, if during the installation, the
option "ARM WITHOUT CODE" has been selected. The arming of one subsystem does
not affect the status (armed - disarmed) of the other subsystems.
The individual disarming of the subsystems Α , Β , C can be done by pressing one of
the user codes that have been programmed to disarm each subsystem. The arming
of one subsystem does not affect the status (armed-disarmed) of the other
subsystems.
If during the arming procedure a zone is active then the keyboard shows the
message:
Which means that on zone 5 (Kitchen) a window has
been left open.
If we press " # " the arm command is canceled.
If we press " * " or close the kitchen window we see:
This message is shown for 1 second and immediately the arming process starts.
Armed System Indication
When the system is armed, then next to the clock,
instead of the Olympia electronics logo there is a lock
symbol. Next to the lock symbol we can see which
sections are armed. In this example we can see that
the system is partially armed because only the C
section is armed. If the system was fully armed then
the symbols Α, Β, C would have been displayed.
When the system is disarmed, the lock is removed and the Olympia electronics logo
is displayed once gain.
C
SYSTEM CAN NOT ARM
ZONE 05
KITCHEN
*:
BYPASS ZONE
#: CANCEL
ZONES BYPASSED
READY TO ARM