![background image](http://html.mh-extra.com/html/olt/ssgs812-fj-ply/ssgs812-fj-ply_assembly-manual_732287027.webp)
62.
Attach center panel as per Step 58. Position remaining Short Outside Roof Panel and attach
as per
Steps 56-57.
Completed Polygal Side Roof Panels
64.
Position Polygal Panel with equal gaps between
rafters and overhanging the end of rafters by 1”. With
6 - 1” screws, secure panel to Polygal Support Cleats.
equal gaps
on each side
of rafter.
63.
Installation of
6
Polygal Panels
is next.
Start by removing protective plastic layer on
each panel. Exterior/interior side of protective
polygal film is printed on film, be sure to note
the side and install accordingly. Slide panel
up between rafters so it rests on Polygal
Support Cleats. From the inside, carefully
slide end of panel underneath plywood.
66.
Complete installation of remaining Polygal
Panels as per
Steps 63 - 65
.With a Caulking Gun,
apply Silicon down each side of rafter to seal gaps
between rafters and Polygal Panels.
65.
Use 3 - 3/4” screws to secure Polygal
Panel to underside of roof plywood.
Caulking
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 27