![background image](http://html.mh-extra.com/html/olt/ssgs812-fj-ply/ssgs812-fj-ply_assembly-manual_732287023.webp)
48.
Where Ridge Boards meet, press together and
secure with 12 -1 1/4” screws. In addition, place 4 - 1 1/4”
screws into any of the remaining Metal Ridge Board
Connectors holes. Complete both sides.
49.
When aligned,
secure Gable framing to rafters
with 7 - 2” screws. Further secure to top plate with an
additional 5 - 2” screws (7 in total). Secure other Gable.
Offsetting Metal Ridge
Board Connectors.
Important:
If Gable framing does not line up with Rafters,
remove temporary 2” screws from gable framing (Step 39),
re-align gable and proceed to step 49.
Leave a 1” gap
from top of rafter
Roof Gusset
Center Rafter
91” wide
50.
Prior to securing the
Long Rafter Side,
make sure walls are aligned correctly. Have
two helpers push on both side walls at the top
from the outside until side top plates are 91”
apart from the
inside
.
51.
Attach all
Single
and
Double Rafter Brackets
where rafters meet Top Wall Plates inside of
shed. Attach with 2 - 1 1/4” screws and 2 - 2” screws per Single Rafter Bracket and 6 - 2” screws
per Double Rafter Bracket. Position a Roof Gusset on the Center Rafter. Leave a 1” gap from the
top side of the rafter.
Rafter Brackets are bent to 22° and
33°. Use correct bracket for each side.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 23