13.
Locate both rafter gussets. On a
ladder, position 1st gusset evenly against
ceiling trim as shown above. Drill pilot holes
with appropriate angles first. Secure with
2 - 4” Torq screws per side. Complete both
gussets. Torx Drive Bit required!
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 9
Parts
8A - Rafter Gussets
(2 1/2” x 5 1/4” x 51 3/4”)
x 2
Hardware
ST2 - 4” Torq Screws
x 8 total
12.
Locate short ceiling trim and
position over ceiling seam evenly to
cover gap. Attach with 4 finishing nails
per piece.
Parts
7A - Short Ceiling Trim
(1/4” x 2 1/2” x 30 7/8”)
x 2
Hardware
N1 - 1 1/2” Finishing Nail
8 total
Short Ceiling Trim
2 screws/side
Ceiling Trim
Bit found in Hardware Bag!
BT2 - Torx Drive Bit
Torx Bit Required for
Step 13