20.
Locate double window center wall
panel
(45 1/4” wide)
. Panel wall siding will
be flush with plywood backing. Position
between previously installed panels on wall
studs and secure with 6 - 1 1/4” screws.
Parts
5B - Double Window Wall
Center Panel
(
45 1/4”w
x 74 1/2”h)
x 1
Hardware
S2 - 1 1/4” Screws
x 6 total
Pre-drill siding
with 1/8” drill bit.
21.
Locate single window wall panel
(45” wide).
All single window wall panels (4) are built exactly
the same and are interchangeable. Position in rear
corner. Slide edge tight in corner against side wall
plywood backing. Adjust panel so window openings
match. Secure with 6 - 1 1/4” screws.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13
Parts
6B - Single Window Wall
Rear Panel
(
45”w
x 74 1/2”)
x 1
Hardware
S2 - 1 1/4” Screws
x 6 total
