Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12
18.
Locate solid center wall panel
(45 1/4”
wide)
. Center panel wall siding is flush with
plywood backing. Position between previously
installed panels on wall studs and secure with
6 - 1 1/4” screws.
Hardware
S2 - 1 1/4” Screws
x 6 total
Pre-drill siding
with 1/8” drill bit.
There are 2 Solid Center Wall
Panels that are identical. The
second panel is used in
Step 23
on the rear wall.
Pre-drill siding
with 1/8” drill bit.
Parts
3B - Solid Side Wall -Center
(
45 1/4”w
x 74 1/2”h)
x 1
19.
Locate double window wall, left and right
wall panels
(42 3/4” wide)
. The panels will be
recessed on the outside edge as per
Steps
16-17
. Position on wall studs and secure as
previously illustrated.
Parts
4B - Double Window Wall
Outside Panels (Left/Right)
(
42 3/4”w
x 74 1/2”h)
x 2
Hardware
S2 - 1 1/4” Screws
x 12 total
