OLT SS84-SLIDER-METAL-AK, Assembly Manual

Page: 4 / 36

Thank you for purchasing our 8x4 SpaceSaver Shed with Sliding Door.
Please take the time to identify all the parts prior to assembly.
Parts List:
A. Floor Section
1 - 45 ½” x 75” - Large Floor Frame (2 Joists unattached)
1 - 45 ½” x 21” - Small Floor Frame (2 Joists ATTACHED)
2 - 1 ½” x 3 ½” x 71 7/8” - Floor Joists
(Steps 1 - 3)
2 - 1 ½” x 3 ½” x 45 ½” -
Floor Runners Short
3 - 1 ½” x 3 ½” x 47 ¾” - Floor Runners Long
(Steps 4 - 5)
1 - 5/8” x 45 ½” x 75” -
Plywood Flooring
1 - 5/8” x 45 ½” x 21” - Plywood Flooring
(Steps 6 - 8)
B. Wall Section
5 - 1 ½” x 2 ½” x 45 ½” - Bottom Wall Plates
4 - 45 ½” x 75” - Wall Panels
1 - 45 ½” x 73” - Front Wall Panel
(Steps 9 - 17)
1 - 2” x 3 ½” x 68 1/4” -
Door Header - Long (Dado on edge)
1 - 2” x 3 ½” x 22 3/4” - Door Header - Short (Dado on edge)
1 - 1 ½” x 3 ½” x 73” - Door Jamb - Vertical
1 - 1 ½” x 2 ½” x 44” - Interior Door Header
(Steps 18 - 19)
2 -
Top Triangular Siding Pc for Angle Wall Extenders (L/R)
2 - 4
5 ¼
” - Angle Wall Extenders (L/R)
2 - 9” x 45 ½” - Wall Extenders
(Steps 20 - 27)
1 - ¾” x 3 ½” x 70” -
Horizontal Wall Cleat
1 - ¾” x 3 ½” x 21” - Horizontal Wall Cleat
(
Step 27)
C. Rafter & Roof Section
6 - 1 ½” x 2 ½” x 54” - Rafters
2 - 1” x 3 ½” x 48” - Front Soffits
2 - ½” x 3 ½” x 48” - Rear Soffits
(Steps 31 - 36)
6 - ¾” x 3 ½” x 50”
- Roof Battens
4 - ¾” x 1 ½” x 21 ½” - Batten Spacers
(Step 37 - 40)
2 -
Rafter/Facia Nailing Strips - ¾” x ¾” x 51”
(Step 41)
3 - Metal Roof Panels - 39”w x 58 1/2”d
(Step 42 - 48)
Foam Enclosures for Metal Roof - Several Strips
(Step 47, 66)
D. Miscellaneous Section
(Skirting, Trim, Door, Facia & Misc. Parts
)
4 - ¾” x 4 ½” x 45
¼
” - Bottom Skirting (Bevel Siding)
2 - 3/4” x 4” x 45 1/4”) - Front Bottom Skirting (non Bevel)
(Steps 49 - 51)
6 -
7/8” x 2 ½” x 36” - Corner Filler Trims
2 - 7/8” x 2 ½” x 10” - Rear Top Corner Filler Trims
2 - 1/2” x 2 ½” x 36” - Corner Filler Trims - Front Left
(Step 18)
(Steps 18 & 29 & 52)
2 - ½” x 5 ½” x 78 ½” -
Front Corner Trims
2 - ½” x 5 ½” x 88 ¾” - Rear Corner Trims
2 - ½” x 2 ½” x 80” - Side Front Corner Trims
1 - ½” x 2 ½” x 88 ¾” - Rear Middle Trim
2 - ½” x 2 ½” x 88 ¾” - Side Rear Corner Trims
(Steps 53 - 56)
Sliding Door Parts
1 - 49” x 73”
-
Sliding Door
1 - 71” long - Aluminum Door Track with Hanging Brackets
1 - 1 1/2” x 1 5/8” x 80 3/4” - Lower Door Track
1 - 3/4” x 3” x 87 3/4” - Lower Door Track Cover
2 - 1 1/2” x 2 1/4” x 3 1/2” - Lower Door Track Stops
1 - 1 ½” x 2 ½” x 66 1/4” - Door Stop
(Steps 57 - 62)
2 - ½” x 4” x 54 1/8” - Side Facia (Angle Cut Ends) - reverse
4 - ½” x 4” x 50 ½” - Front and Rear Facia
(Steps 63 - 65)
2 - 60” long -
Metal Ridge Caps
(Step 67)
1 - Detail Facia Plates (4” high)
(Step 68)
1 - 18” x 22 ½” - Window Insert
1 - 24 1/16” angle cut / 3 -23” straight cut - Window Trim Pkg
(Step 69 - 70)
1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall panel
siding is damaged or to shim floor or door.
Note: All Trim, Facia and Bottom Skirting pieces will be positioned rough face out when installed.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 4