73.
Position
Window Trim
around window doing a dry run first and attach with
4 - 1 1/2” Finishing Nails
per piece. Trim Sizes = 1x 24 1/16” = top (angle cut
on ends) / 3 x 23” = Sides & Bottom. Window trim has a small dado on reverse
face. Outside flange of window will roughly sit in the dado to give a better fit.
Trim dado sits
in flange.
T
rim dado
75.
Attach
Door Handle.
Handle should
be positioned with larger flange to top.
Mount with
3/4” Black Headed Screws
.
74.
Assemble Flower Box with Assembly Instructions
included with this Manual on Page 35. Center completed
flower box below bottom of window trim and secure with
2 - 2 1/2” Screws
. Screw from inside of box into the cen-
ter wall stud. Attach second screw 2” below first screw.
76.
Attach Black Barrel Bolt as illustrated above with
2” & 3/4” Black Screws
. Note how barrel bolt receiver
is positioned higher than male. Do a dry run first to
position Barrel Bolt correctly.
Important
- Drill pilot holes with 1/8” drill bit prior to
securing with screws to prevent wood splitting. Drill
shallow pilot hole only since the screw is only 3/4” long.
Barrel bolt
receiver.
3/4” Black Screw.
2” Black Screws.
2” Black
Screws.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 33
