4. Trim & Miscellaneous Section
Bottom Skirting
4A:
5 - ½” x 4 ½” x 45 ¼” - Side/Rear Bottom Skirting (FJ Bevel Siding)
4B:
3 - ½” x 4” x 45 ¼” - Front Bottom Skirting
4BB:
3 - ½” x 1 ½” x 45 ¼” - Top Wall Trims (FJ Bevel Siding)
Filler Trim
4C:
4 - ½” x 2 ½” x 42” - Front Corner Filler Trims
4D:
4 - ¾” x 2 ½” x 38” - Rear Corner Filler Trims
Door System
4E:
2 - Aluminum Door Tracks (with brackets attached)
4F:
2 - 36” x 73” - Sliding Doors
4G:
2 - 1 ½” x 1 ½” x 61 1/8” - Lower Door Trak
4HA:
3 - ¾” x 3” x 44 ¼” - Lower Door Track Cover
4IA:
3 - 1 ½” x 2” x 3 ½” - Sliding Door Track Stops
4J:
1 - ¾” x 3 ½” x 71 ½” - Interior Door Flange
4KA:
2 - 1 ½” x 3 ½” x 66 ½” - Track Overlay - Top
4KB:
2 - ¾” x 5 ½” x 67” - Track Overlay - Front
4KC:
2 - ½” x 3 ½” x 5 ½” - Track Overlay - Ends
4KD:
3 - ½” x 4 ¼” x 44 ¼” - Track Overlay - Sill (Bevel)
Outer Wall Trim
4L:
2 - ½” x 5 ½” x 88 ¾” - Front Corner Trims
4M:
2 - ½ x 2 ½” x 88 ¾” - Side Front Corner Trims
4N:
2 - ½” x 5 ½” x 78 ½” - Rear Corner Trims
4O:
2 - ½” x 2 ½” x 80” - Side Rear Corner Trims
4P:
2 - ½” x 2 ½” x 78 ½” - Rear Middle Trims
4Q:
2 - ½” x 2 ½” x 7 ½” - Front Middle Trims
Facia
4R:
2 - ½” x 5 ½” x 54 1/8” - Side Facia (Angle Cut Ends)
4S:
4 - ½” x 5 ½” x 50 ½” - Front and Rear Facia - Left/Right
4T:
2 - ½” x 5 ½” x 45 ½” - Front and Rear Facia - Center
4U:
5 - Trim Detail Plates (5 ½” high)
Ridge Boards
4V:
3 - ½” x 4 ½” x 49 ¼” - Roof Ridge Boards
Windows
4W:
2 - Window Inserts 18 1/4”w x 23”h
4X:
2 - Window Trim Kits
1 - Top pc - 24 1/16” Length - Angle Cut Ends
3 - Side/Bottom pcs - 23” Length
Miscellaneous
4Y:
1 - 45 ¼” - Extra Piece of Bevel Wall Siding
- Use if side/rear wall panel siding is damaged or to shim floor or door.
4Z:
1 - 36” - Extra Piece of Lap Siding
- Use if front wall panel siding is damaged
66
67-68
61-65
57-60
43-45
46-47
48-56
Steps
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 5
Note: All Trim, Facia, and Bottom Skirting pieces will be positioned rough face out when installed.
