Thank you for purchasing our 12x4 Slider Lean-To Storage Shed.
Please take the time to identify all the parts prior to assembly.
1. Floor Section
Floors
1A:
2 - 45 ½” x 70 ¾” - Floor Frames
1B:
4 - 1 ½” x 3 ½” x 67 3/4” - Floor Joists
1C:
2 - 1 ½” x 3 ½” x 45 ½” - Floor Runners - Short
1CC:
5 - 1 ½” x 3 ½” x 47 ½” - Floor Runners - Long
1D:
2 - 5/8” x 45 3/8” x 70 5/8” - Plywood Floor
2. Wall Section
Main Wall Panels
2AA:
5 - 45 ½” x 75” - Side/Rear Wall Panels
2AB:
5 - 1 5/8” x 2 ½” x 45 ½” - Bottom Wall Plates - Side/Rear Walls
2BA:
2 - 35” x 73” - Front Wall Panels
2BB:
2 - 1 5/8” x 2 ½” x 35” - Bottom Wall Plates - Front Walls
Door Headers
2C:
2 - 2” x 3 ½” x 26 ¼” - Door Headers - Short
2D:
1 - 2” x 3 ½” x 84” - Door Header - Long (88” Aluminum Strip Attached)
2E:
1 - 1 ½” x 3” x 66 ½” - Interior Door Header
Extender Walls
2F:
2 - Top Triangular Siding Pc for Angle Wall Extenders
2G:
2 - 45 ¼” - Angle Wall Extenders - Left/Right
2H:
3 - 9” x 45 ½” - Wall Extenders
2I:
3 - 1 1/2” x 2 1/2” x 42 3/8” - Wall Extender Cleats
Wall Cleats
2J:
1 - ¾” x 3 ½” x 84” - Horizontal Wall Cleat - Long
2K:
2 - ¾” x 3 ½” x 26 ¼” - Horizontal Wall Cleats - Short
3. Rafter and Roof Section
Rafters
3A:
9 - 1 ½” x 2 ½” x 54” - Rafters
3B:
2 - ½” x 3 ½” x 48” - Front Soffits - Left/Right
3C:
1 - ½” x 3 ½” x 45 ½” - Front Soffit - Center
3D:
2 - ½” x 3 ½” x 48” - Rear Soffits - Left/Right
3E:
1 - ½” x 3 ½” x 45 ½” - Rear Soffit - Center
Roofs
3F:
2 - ¾” x ¾” x 51” - Facia Nailing Strips
3G:
2 - Roof Panels - 51” w x 56” d (1 - Left 1- Right)
3H:
1 - Roof Panel - 45 ½” w x 56” d (Center)
3I:
8 - 5 ½” Wide x 16” to 18” long - Filler Shingles
14-15, 23
Steps
Steps
16-21
22
Steps
31-42
7-13
1-6
25-30
Parts List - Pages 2, 3, and 4
Advice:
Wood has a tendancy to split when
screwing near the ends of a board. To prevent
splitting, it is always recommended to pre-drill
pilot holes before screwing into these areas.
Continued on next page.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
