3. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
Left Roof Panel
(Part 3G)
Right Roof
Panel (Part 3G)
Rear Soffits - L/R
- 2pcs (Part 3D)
Rafters - 9pcs
(Part 3A)
Filler Shingles
- 8pcs. (Part 3I)
Facia Nailing Strips
- 2pcs (Part 3F)
Center Roof
Panel (Part 3H)
Rear Soffit - Center
- 1pc (Part 3E)
Front Soffits - L/R
- 2pcs (Part 3B)
Front Soffit - Center
- 1pcs (Part 3C)
24.
To complete Wall Section
,
attach bottom 2x3 wall plates to plywood floor with
2 - 2 1/2” Screws
per wall section. Prior to securing, make sure wall panels are
aligned correctly on the floor. Refer to
Step 9.
Wall siding should overhang floor
while 2x3 wall plates should sit
flush with floor.
Hardware
S1
- 2 1/2” Screws
x 28 total
Bottom W
all
Optional
- Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 19
