Wall panel will
sit flush with
floor framing.
Do Not Attach Walls To
Floor Until Step 24
13.
Carefully lay
2BA
- Front Wall Panels
face down. Position and attach
2BB - Bottom Wall Plates
to bottom of wall studs of each wall panel with
3 - 2 1/2” Screws
as per
Step 7
. Complete other remaining Front Wall.
Place Front Walls so wall framing is flush with floor frame and siding
overhangs. Attach with
3 - 2 1/2” Screws
per panel as per
Steps 10 - 12.
12.
Complete remaining side wall attachment as per
Steps 10 - 11.
Front of Shed
Parts
2BA - Front Wall Panels
(35” wide x 73” high)
x 2
2BB - Bottom Wall Plates
(1 5/8” x 2 1/2” x 35”)
x 2
Hardware
S1
- 2 1/2” Screws
x 12 total
Ensure bottom plate
is flush side-to-side
with wall studs.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13
