109.
Picture above shows illustration of
completed Cupola on gazebo.
110.
Locate all Gazebo Ridge Caps. Note,
there are left and right offset Ridge Caps.See
Step 112
for detail illustration of the difference.
Place 1st Ridge Cap on roof seam slightly
overhanging roof end and attach with 2 - nails.
111.
Locate and place opposite 2nd Ridge Cap
on so slight overhanging or recessed on
initial Ridge Cap.
112.
Attach 2nd Ridge Cap approx. 9” from
shingle butt with 2 - 1 1/4” shingle nails.
113.
Place 3rd Ridge Cap on roof seam. Make
sure to choose shingle with opposite angle offset.
114.
Start the 3rd Ridge Cap approx 8” from
bottom of 2nd Ridge cap butt. Attach with
2 - 1 1/4” shingles nails 9” from butt.
9”
8”
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 34
G. Misc. Section
