![background image](http://html.mh-extra.com/html/olt/12x8-garden-in-a-box/12x8-garden-in-a-box_assembly-manual_732289004.webp)
A - Side
A - Rear
Door Panels
Front
A
- Side
A
- Side
A - Front
A - Rear
A
- Side
A - Rear
A - Rear
A - Front
C
C
A
- Side
Important:
You can find the
Square Drive Bit
for the screws in
with the
Hardware
Kit Bag.
Important:
Before positioning
Panels, lay out footprint and level
ground perimeter.
If possible, dig a small trench and
backfill with 1 or 2 inches of sand.
Sand will make it easier to level
panels.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
1.
Orientate
Side/Rear Panels
and
Door Panels
as illustrated
(their Screens positioned to the
inside).
Parts (Steps 1 - 8)
A - Side/Rear Panels
(46” x 33 1/2”)
x 9
C - Door Panels
(22 3/4” x 31 1/2”)
x 2
Hardware (Steps 1 - 2)
S1
- 2 1/2” Screws
x 1 total
2.
Starting in rear corner, position
Side & Rear
Panels
together so framing is flush at top and
sides. When aligned, attach frames together at
top with
1 - 2 1/2” Screw
. Use
Wood Clamp
to
hold frames together. Pre-drill rear frame first
with 1/8” diameter bit to prevent wood from
splitting.
A - Side
A - Rear
2 1/2” Screw
Frames even.