![background image](http://html1.mh-extra.com/html/olt/12x4-spacesaver-shed/12x4-spacesaver-shed_assembly-manual_3831874010.webp)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 10
Side Solid W
all
Rear Solid W
all
Be sure that the rear
wall panels fit
between the side wall
panels (sandwiched).
Optional
- Caulking
seams will help prevent
moisture from entering
at seam.
Caulking not
included in kit.
11.
With the corner wall attachment complete, position a second rear wall panel in place so bottom
2x3 wall framing is sitting flush with outside floor joists. Wall siding should overhang floor by
approximately 3/4”. When positioned correctly, attach both side wall panel studs together as per
Step 10
.
10.
Position rear solid wall into place on plywood floor. Butt both vertical wall
studs of side and rear walls together and attach with
3 - 2 1/2” Screws
.
Screw at the bottom, middle and top of stud to secure properly.
Note: Drill pilot holes in studs to prevent splitting
.
Hardware (Steps 10 - 12)
S1
- 2 1/2” Screws
x
12 total
Pilot Hole
first.
Side W
all