Olmo Inventa Series, User And Installation Manual

Page: 4 / 32

Distance from ceiling
over 200 mm should be
2. Back-light function (optional)
Hold down any button on remote control to activate
the back light. It automatically shuts off 10 seconds
later.
Note: Back-light is an optional function.
3. Auto Restart Presetting
The air conditioner has an Auto-Restart function.
of Remote Control
Safeguarding the environment
This appliance is made of recyclable or re-usable
material. Scrapping must be carried out in
compliance with local waste disposal regulations.
Before scrapping it, make sure to cut off the mains
cord so that the appliance cannot be re-used.
For more detailed information on handling and
recycling this product, contact your local
authorities who deal with the separate collection
of rubbish or the shop where you bought the
appliance.
SCRAPPING OF APPLIANCE
This appliance is marked according
to the European Directive 2012/19/EC,
Waste Electrical and Electronic
Equipment (WEEE).
This marking indicates that this
product should not be disposed with
other household wastes throughout
the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal,recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling
.
Safety precautions
Symbols in this Use and Care Manual are
interpreted as shown below.
Be sure not to do
.
Pay attention to such a situation.
Grounding is essential.
Warning: Incorrect handling could cause a
serious hazard, such as death, serious injury, etc.
Do not use the power
supply circuit breaker
or pull off the plug to
turn it off during
operation. This may
cause a fire due to
spark, etc.
OFF
ON
It is the user's
responsibility to
make the appliance
be grounded
according to local
codes or ordinances
by a licenced
technician.
Do not touch the
operation buttons
when your hands
are wet.
Turn off the
applianceby remote
control firstly before
cutting off power
supply if malfunction
occurs.
ON
OFF
MODE SMART
QUIET DIMMER ECONOMY
FEEL
FAN SPEED
CLOCK TIMER ON TIMER OFF
SLEEP
TEMP.
TEMP.
SUPER
Use correct power
supply inaccordance
with the rating plate
requirement.
Otherwise, serious
faults or hazard may
occur or a fire maybe
break out.
Keep the power
supply circuit
breaker or plug from
dirt. Connect the
power supply cord to
it firmly and correctly,
lest an electric shock
or a fire break out
due to insufficient
contact.
OFF
ON
It is harmful to your
health if the cool air
reaches you for a long
time. It is advisable to
let the air flow be
deflected to all the
room
.
Prevent the air flow
from reachingthe gas
burners and stove
.
Never insert a stick or
similar obstacle to the
unit. Since the fan
rotates at high speed,
this may cause an injury.
Do not repair the
appliance by yourself.
If this is done
incorrectly, it may cause
an electric shock, etc.
Do not put any objects
on the outdoor unit.
Do not knit, pull or
press the power supply
cord, lest the power
supply cord be broken.
An electric shock or fire
is probably caused by
a broken power supply
cord.
Installation diagram
Installation must be performed in accordance with
the national wiring standards by authorized personnel only.
Above figure is only a simple presentation
of the unit, it may not match the external
appearance of the unit you purchased.
Distance from the obstacle
should be over 3000mm.
Distance from floor
over 2500mm. should be
Distance from wall
should be over
50mm
Distance from
the wall
be over 50mm
should
Distance from the
obstacle should be
over 500mm.
Air intake distance
from
the wall
should be
over 250mm
Air intake
distance from
the wal
should be
over 250mml
air outlet distance from the wall
should be over 500mm
over 250mm
Installation instructions
2