Enhanced 10/100Base-TX to 100Base-FX Converter
Local Loopback
1. Test Condition setup – for the function to produce
an accurate result, be sure to set switches
according to the table below:
DIP Switches
1
2
3
4
5
6
7
Converter A
OFF FD
100
FD
OFF
ON OFF
Converter B
OFF FD
100
FD
OFF
OFF OFF
Test Condition
2. Launch a loopback or diagnostics testing program
and follow the instructions given. Typically, the
instructions will be similar to the following:
a.
Enter the number of test messages
(frame packets) to be sent (Between 1 –
1000)
b.
Click on the START button
c. The program will send a testing
message looped in the copper segment,
and display a pass/fail result
- 14 -
