Enhanced 10/100Base-TX to 100Base-FX Converter
Loopback Test
This Converter features DIP switches to activate both
local and remote loopback diagnostic test functions.
Use local loop back to check if the copper segment is
connected properly, and use remote loop back to
check if the fiber segment is connected properly.
Please see Diagram below:
Dip Switch 6 ON: enables local loop back function
OFF: disables local loop back function
Dip Switch 7 ON: enables remote loop back function
OFF: disables remote loop back function
Make sure that the cables are connected properly
before getting started. Conduct either the local or
remote test, not both at the same time. Follow the
steps below to perform the diagnostic tests.
- 13 -
