Olivetti PG L2555, Service Manual

Page: 94 / 293

4-27
F4DX Abnormality detecting in the Entity Manage-
ment Department (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. [Main PWB]
There is no hard components that can be checked in the
field.
F4EX
F4FX Abnormality detecting in the JOB Management
Department (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of acquisi-
tion.
F52X Abnormality detecting in a JOB execution part "(1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of acquisi-
tion.
F53X
F55X
F56X
F57X
F61X Abnormality detecting in a report creation part (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of acquisi-
tion.
[Controller failure]
Turn power on and off to clear.
USB log is required for investigation.
F63X Abnormality detecting in a device control sec-
tion (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters.
F68X Abnormality detecting in a storage device con-
trol section (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. * F684 is the overwrite error at the time
of an HDD security kit.
F90X Abnormality detecting in the extension applica-
tion service part (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. Since the USB log at the time of occur-
rence is needed for analysis, please
give me cooperation of acquisition.
F93X Abnormality detecting in the extension applica-
tion management part (1) U021 Controller backup initialization is carried out and an operation check is
performed.
(2) Exchange a Main board and perform an operation check.
(3) Get USBLOG and contact service headquarters. Since the USB log at the time of occur-
rence is needed for analysis, please
give me cooperation of acquisition.
Code Contents Verification procedure & check point Remarks
PG L2555
/
PG L2550
/
PG L2545