manualshive.com logo in svg

Olivetti PG L2555, Service Manual

Share
Download
Olivetti PG L2555 Service Manual Download Page 281

1-4-3

(3) Removing the side covers

Note: To gain access to any of the internal parts, the side covers must be removed first.

1. To remove the side cover, remove two

screws at the bottom side of the side cover.

2. Remove the other side cover using the

same manner.

Figure 1-4-3

(4) Removing the paper outlet and top cover

To remove the paper outlet or the top cover, follow the procedure below. We recommend that the paper outlet is also 
removed when removing the top cover.

1. To remove the paper outlet, remove two

screws as follows.

2. To remove the top cover, remove four

screws as follows.

Note The paper adjuster knob may not be
removed before removing the top cover.

Figure 1-4-4

Side cover

Side cover

Top cover

Paper outlet

Summary of Contents for PG L2555






































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands