manualshive.com logo in svg

Olivetti PG L2555, Service Manual

Share
Download
Olivetti PG L2555 Service Manual Download Page 63

1-3-20

Drum

Drum surface refreshing

Description

The execution of the drum refresh (no paper)
Rotates the drum approximately 3 minutes with toner lightly on the overall drum using 
the high-voltage output control. The cleaning blade in the drum unit scrapes toner off the 
drum surface to clean it.

Purpose

To clean the drum surface when image failure occurs due to the drum. This mode is 
effective when dew condensation on the drum occurs.

Method

1. Enter the Service Setting menu.
2. Select [Drum] using the cursor up/down keys.
3. Press the OK key.
4. Select the [YES] using the left select key.

Drum surface refreshing will start.

Drum2

Drum surface refreshing 2

Description

The execution of the drum refresh (with paper)
Drum surface refreshing be done by being rubed to the paper that was fed from MP.

Purpose

To clean the drum surface when image failure occurs due to the drum. This mode is 
effective when dash-mark on the drum occurs.

Method

1. Enter the Service Setting menu.
2. Select [Drum2] using the cursor up/down keys.
3. Press the OK key.
4. Select the [YES] using the left select key.

Drum surface refreshing will start.

Service items

Description

Summary of Contents for PG L2555






































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands