manualshive.com logo in svg

Olivetti PG L2555, Service Manual

Share
Download
Olivetti PG L2555 Service Manual Download Page 238

1-4-1

1-4 Assembly and Disassembly

1-4-1  Precautions for assembly and disassembly

(1) Precautions

Before starting disassembly, press the Power key on the operation panel to off. Make sure that the Power 
lamp is off before turning off the main power switch. Unplug the power cable from the wall outlet.
When handling PWBs (printed wiring boards), do not touch parts with bare hands.
The PWBs are susceptible to static charge.
Do not touch any PWB containing ICs with bare hands or any object prone to static charge.
When removing the hook of the connector, be sure to release the hook.
Take care not to get the cables caught.
To reassemble the parts, use the original screws. If the types and the sizes of screws are not known, refer to 
the PARTS LIST.

Summary of Contents for PG L2555






































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands